PW 9000DPA (Modular 10-250kVA)PW 9000DPA (Modular 10-250kVA)

PW 9000DPA

A revolutionary rack-mounted uninterruptible power supply designed with ‘hot swap’ modules for future scalability. A transformerless UPS system with class-leading ‘six nines’ (99.9999%) power availability for demanding IT environments and data centres.

A revolutionary backup power supply offering up to 250 kVA (200 kW N+1) in a single frame, and a low total cost of ownership with scalability for the future.

Advanced Decentralised Parallel Architecture (DPA)

Built on a Decentralised Parallel Architecture (DPA), each module has the necessary hardware and software for full system operation to minimise downtime and failures.

Easy to replace ‘hot-swap’ modules

True ‘hot-swap’ modularity enables the safe removal and/or insertion of UPS modules into a PW 9000DPA system without risk to the critical load and without the need to either transfer the critical load onto raw mains or remove power from the critical load. This directly addresses today’s requirement for continuous uptime, reducing mean time to repair (MTTR).

Future proof installation

Future proof installation is assured with the PW 9000DPA’s scalability and ability to supply the most demanding of modern loads.

Smallest footprint saves space

Class leading power density of 342kW/m2 significantly minimises the floor space required to accommodate the PW 9000DPA. This is particularly important in data centres where space must be maximised to accommodate revenue-earning equipment.

Maximum availability

With its six nines availability (99.9999%), PW 9000DPA maximises availability by combining the benefits of decentralised parallel architecture, parallel redundancy and ‘hot-swap’ modularity.

High reliability

The PW 9000DPA is designed to automatically operate as a parallel redundant system, ensuring that the critical load always receives the highest possible level of power protection.

Class-leading energy efficiency

This uninterrupted power supply lowers carbon footprint with 96% true online efficiency, and an input current total harmonic distortion (THDi) of <2%.

Low cost of ownership

By delivering energy efficiency, scalable flexibility and ergonomic design, the PW 9000DPA offers a low total cost of ownership and easy serviceability.

Blade friendly

Blade servers typically have a leading power factor, which can present problems to UPS systems, particularly if they are not designed to power such loads. The PW 9000 DPA is designed to power all types of electrical loads, including blade servers. It can provide fully rated output power to power factors in the range of 0.9 leading to 0.8 lagging.

Actual kVA

30-250 kVA

Type

Three phase

Standalone / Modular

Modular

Parallelable up to

2 modules

Rated output voltage range

380/220; 400/230; 415/240V three phase

Working mode

Online double conversion

Efficiency

Up to 95.5%

Power density per m2

Up to 158kW/m2 / 158kVA/m2

Battery compartment

External battery cabinets or integrated in UPS cabinets

Maintenance bypass

Standard

Network/web interface

Option

Volt free contacts

Standard

Input current distortion THDi @100% load

< 3%

Scalable (N+1)

Yes (vertical)

Hot-swappable modules

Yes

ECA scheme approved

Yes

Transformerless

Yes

Application

Data Centres, Large Networks

GET A QUOTE / FREE SITE SURVEY

Are you interested? Call us on +65 6302 0718 or complete the form below, and let us supply you with a quote. Required Info*








(If you do subscribe you can cancel at any time.)
Please leave this field empty.

Top

Pin It on Pinterest

Share This